DIY Chicken Coop Plans – Functional & Save Money

When it comes to chicken coops, there are many different plans you can make. After all, you wouldn’t believe the complexity that goes into the designing of one of these feathery houses.
You can of course go to a local store and purchase a pre-made chicken coop, and this would be perfectly acceptable. But then you would miss all the fun of designing your own coop, and naturally, there are needs your chickens need met, that you might not be able to meet with the mass produced models.
For instance, what happens if you have an injured chicken?
You may need to separate that chicken from the others to make sure that it does not sustain an injury from the other, stronger chickens.
You probably will not have this type of accommodation in a factory chicken coop. For this reason, you will find that DIY chicken coop plans are the way to go.
Simple Chicken Coop
The best part about using a homemade chicken coop plan is that you can improve upon it at will.
For instance, you might need an outside door that leads to the chicken roosts so that you can collect the eggs. It would be very hard to add this into a factory built coop, but when you are using a DIY coop, you can build it in as you go.
Keeping Your Chicken Safe
There are many other things you can do to make your DIY chicken coop project a success. Most importantly however, you can add things into your coop to make it a little safer.
Let’s face it, the standard chicken coops may not be built…shall we say…intelligently.
If you have ever owned chickens before then you know they have a habit of jumping. The problem with this is that chickens have very long necks, and if you have a low ceiling then the chicken has a chance of breaking its neck.
When you make your DIY chicken coop with a proper plan, you can make the ceiling as high as you want it to be within reason.
You will also want to make sure that you stay away from coops that have rafters, because these also cause major issues for chickens.
At some point, you’ll need to clean the coop, therefore you will want to make sure you can actually get in and out easily. A good DIY plan will allow you to get in and out very easily, meaning that scooping out the waste and bedding will be a cinch.
Homemade Chicken Coop Plan
So where do you find a good DIY chicken housing plan?
You can search online for hundreds of great plans. Some are free while the better construction plans will cost some money. The investment is very small though.
You wouldn’t believe the homemade items you can use to fill out your chicken coop. From pop bottles to pie pans, the options are nearly limitless.
With a DIY bantam coop plan, you’ll be able to outfit your entire coop without breaking the bank.
So go to your favorite search engine and look for “DIY Chicken Coops”, or variations on those words and you’re going to find some rather amazing things.
You can either follow the instructions to the letter, or you can make your own improvements. It’s up to you, and the ceiling is the limit!
If you are looking for easy to follow and inexpensive chicken coop plan, check out Building a Chicken Coop plans by Bill Keene.
Bill is a chicken farmer with more than 15 years of experience. His chicken coop blueprint will show you step-by-step how to build a chicken housing with relatively low budget.
==> Click here to read more on Building a Chicken Coop!



This is a very interesting article. My grandfather searched the internet for 2 days not finding anything in Romanian(he doesn’t speak English). He got a good bargain for 20 hens and now he wants to make them a coop. Thank you!
If you want to start a chicken business or a chicken poultry business, it is important also to have the right chicken plans to make sure that you get things in a right way and get good results.
I started on the nest box section today we have an old trailer that we are tearing down so lumber is no problem :) it just takes a little time removing all of the old nails and screws then I’ve been ripping the 2×4′s in half to make the lumber go further and lighten the over all weight as well.
I want this nest box section to last the years so I’m planing on getting so pressure treated plywood for the outer shell.